drilling fluid chemicals

 In the field of oil & gas, We believe in continuous innovation and ideation to ensure perfection in everything we do.


Fluid Loss Additive reduce infiltration of water / oil in the formation. It is engineered specifically to maintain a low and stable fluid loss while providing secondary inhibition of reactive shale and higher viscosity profile. The chemical provides superior wellbore stability, better cuttings integrity, improved solids control and lower drilling costs, and fits for all water-base mud systems.

Shale Stabilizers / Inhibitors

They are avoiding fluid invasion, increasing well bore strength and   avoiding pore pressure transmission. The low permeability seal created by the product limits transmission of destabilizing wellbore pressure into the formation.

Loss Circulation Material

 The Thief Zone Seal (TZS) Additive is a smart lost circulation prevention and mitigation solution. It essentially helps in sealing and closing fractures in the formation, thus effectively controlling fracture propagation and wellbore instability. The TZS Additive is a blend of granular and fibrous materials in a single sack, high solids formulation. 


Viscosifiers are used to improve hole cleaning and solid suspension capabilities of Drilling Fluids.


It is a clay which is composed of three layered clays such as montmorillonite, and is widely used as a mud additive for viscosity and filtration control. Commercial Bentonite ores vary widely in amount and quantity of swelling clays.


Lubricants are used for minimizing torque and Drag.

EP Lubricant:

It is an environmentally friendly water soluble lubricant designed to reduce torque & drag and to lower the potential of bottom hole assembly balling in all water based mud systems, under extreme pressure conditions. It imparts extreme pressure lubricating properties to the drilling fluids by getting adsorbed on the exposed surface and forming a physical barrier in the form of a film.


Dispersants reduce viscosity and Gel Strengths.

Chrome free deflocculant is basically chrome free lignosulphonate. It is a versatile deflocculant, temperature stabilizer, fluid conditioner and Gel Strength reducer for Water Base Muds.


Drilling detergent is an aqueous blend of surface active agents. It is designed to reduce the surface tension of water base mud systems as well as reduce the sticking tendencies of water sensitive shale cuttings. It can be directly added to the mud system through tanks with no compatibility issues.

Oil Based Mud Systems

         -Primary Emulsifier

         -Secondary Emulsifier

         -Organophilic clay